RS485 Modbus Fixed Inclinometer Sensor with ±15° / ±30° Measuring Range and 800 mm Probe Length for Structural Deformation Monitoring
RS485 Modbus Fixed Inclinometer
,±15° / ±30° Inclinometer Sensor
,800 mm Probe Fixed Inclinometer
The YN-1B fixed inclinometer is engineered for high-precision tilt measurement and structural deformation monitoring. Built with imported MEMS components, it delivers high sensitivity and stable measurement performance, and integrates signal processing circuitry to provide a direct digital angle output.
When used with an inclinometer casing, the YN-1B is suitable for monitoring internal horizontal displacement and vertical settlement in soil, rock masses, dams, roadbeds, and tunnels. Its RS485 interface and Modbus protocol support automatic measurement data collection.
- MEMS Sensing Technology: High sensitivity and stable measurement performance.
- Digital Angle Output: Integrated signal processing for direct digital measurement output.
- Measurement Range: ±15° / ±30°.
- Measurement Accuracy: ≤0.05% F.S.
- Communication Interface: RS485 with Modbus protocol.
- Low Power Consumption: 12 V power supply, operating current below 10 mA.
- Waterproof Performance: Water pressure resistance above 1 MPa.
- Probe Dimensions: 800 mm probe length, 28 mm / 26 mm probe diameter, and 500 mm wheel spacing.
- Monitoring Applications: Suitable for soil and rock slopes, dams, roadbeds, tunnels, and other structural deformation monitoring projects.
| Sensing Technology | Imported MEMS components |
|---|---|
| Measurement Range | ±15° / ±30° |
| Measurement Accuracy | ≤0.05% F.S. |
| Output | Digital angle output |
| Communication Interface | RS485, Modbus protocol |
| Power Supply | 12 V |
| Operating Current | < 10 mA |
| Waterproof Performance | Water pressure resistance > 1 MPa |
| Probe Length | 800 mm |
| Probe Diameter | 28 mm / 26 mm |
| Wheel Spacing | 500 mm |
YN-1B_EN.pdf — English product manual for the YN-1B fixed inclinometer.
Send your inquiry directly to us